Submersible Pumps

Irving's Plumbing distributes submersible pumps for a variety of applications. A submersible pump is a water pump designed to be fully immersed within a tank or storage water container. The pump's motor is usually sealed in oil-filled cavity protected from contacting the water. A submersible pump is used to move water or waste water from a lower pressure area to higher pressure area, and overcomes this difference in pressure by adding energy to the process using a motorized pumping system.

Main Features
The most important features to consider when choosing a submersible pump includes its 1) horsepower rating, 2) its maximum discharge flow - the flow the pump is designed to generate, 3) the maximum discharge pressure, the pressure the pump is meant to produce, and 4) the size of the discharge outlet connection.

Applications
Submersible pumps have a number of distinct applications: pumping large solids or grinding solids to smaller sizes, to moving wastewater at large flow rates or high pressures, to simply pumping up water off the floor or the bottom of a tank. Depending on the design of the pump, some can be used for handling sewage, for moving solids like sand or moving water in an irrigation system.

We offer the following three models from Liberty Pumps: S37 Series | 240 Series (247) | 250 Series (257)

Model	Description	-
S37	Designed for handling problem areas in new home construction, Liberty's S37 Submersible Sump Pump is powered by a heavy duty 1/3 hp motor. With larger large clearances around the impeller, the S37 offers superior solids and debris handling. (1/3 hp, 1 1/2" Discharge and 1/4" Solids-handling) Main Features Rugged and quiet 1/3 hp motor. Oil filled, thermally protected. Permanently lubricated upper and lower ball bearings. 1/4" solids-handling with higher intake screening- helps reduce debris from entering the pump compared to bottom suction designs. Cast iron motor plate. High suction ports to reduce potential jamming. High capacity flow rates. Heavy-duty vertical style float switch. Bi-directional dual lip shaft seal. 1-1/2" NPT discharge. Thermoplastic vortex style impeller with improved clearances for better debris handling. 10' power cord. Water directed flow in cast motor plate allows for improved cooling of motor. Vertical mechanical float switch with heavy-duty contacts. Stainless steel fasteners o High head- 25' shut off. Weight: 14 lbs. Height: 13" Major Width: 9 3/4" Length: 9 3/4" Approx. Turn-on level: 8.25" Approx. Turn-off level: 2.75"
-	-	-
247	One of the most advanced 1/4 hp sump pumps available, Liberty's 247 Cast Iron Submersible Sump Pump features a unique one-piece cast iron housing with peripheral port suction. This design eliminates the motor seal ring and helps reduce potential jamming from debris. Other features on the 240-series include a quick-disconnect power cord and Liberty's patented VMF switch technology for smaller sump pits (model 247). (1/4 hp, 1 1/2" Discharge and 1/4" Solids-handling) Main Features Rugged 1/4 hp motor (15V 6.0 amps 60Hz 3400 RPM), oil filled with thermal overload protection 1/4" solids handling 1-1/2" discharge Hermetically sealed motor and switch cavities, and permanently lubricated bearings Liberty's UNI-BODY casting - a solid, one-piece housing that eliminates the lower motor seal ring found on other pumps Integral, mid-mounted "peripheral-port" inlets - eliminate bottom suction of debris and foreign material Stainless steel volute intake plate, internally mounted. Will not corrode 8 vane, glass reinforced thermoplastic impeller. Non-clog design Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor. (25' length optional)For 25' cord option, add a"-2" suffix to model number. Example: 247-2 for Model 247 with 25' cord. Fasteners - all non-corrosive stainless steel Stainless steel rotor shaft Weight: 21 lbs. Height: 10" Major Width: 9.0" (manual model 240)
-	-	-
257	Liberty's "workhorse" 257 Series Cast Iron Submersible Sump/Effluent Pump features a unique one-piece cast iron body, quick-disconnect power cord and three different switch options - including Liberty's patented Vertical Magnetic Float design (VMF) for smaller pits (model 257). With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 257 series submersible pump is the perfect choice for low-head effluent pumping or basement de-watering. (1/3 hp, 1 1/2" Discharge and 1/2" Solids-handling) Main Features Rugged 1/3 hp motor (115V 5.2 amps 60Hz 1725 RPM). oil filled with thermal overload protection. 1/2" solids handling. 1-1/2" discharge. Hermetically sealed motor and switch cavities, and permanently lubricated bearings. Liberty's UNI-BODY casting - a solid, one piece housing that eliminates the lower motor seal ring found on other pumps. Epoxy powder coat finish Vortex style impeller for superior solids handling. Made of high temperature engineering polymer. Carbon and ceramic shaft seal. Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor. (25' length optional)For 25' cord option, add a "-2" suffix to model number. Example: 257-2 for Model 257 with 25' cord. Fasteners - all non-corrosive stainless steel. 416 stainless steel rotor shaft. Weight: 22 lbs. Height: 10.5" Major Width: 9.6"
-	-	-

NORTH BRANCH
Tel: 416.492.6444
NORTH YORK ONTARIO CANADA

SOUTH BRANCH
Tel: 416.534.2338
TORONTO ONTARIO CANADA

3796 Victoria Park Ave.
North York, Ontario, Canada
M2H 3H7
Tel: 416.492.6444
Fax: 416.492.3303

967 College Street
Toronto, Ontario, Canada
M6H 1A6
Tel: 416.534.2338
Fax: 416.534.0415