Sewage Pumps

Irving's Plumbing offers high efficiency sewage pumps at wholesale prices. Designed for pumping sewage and/or waste water in places where the septic system is higher than the home's main drain, our sewage pumps will pass the wastewater with solids through a discharge line without cutting or grinding them. In a typical sewage system, the wastewater moves through a main drain into a holding tank where the sewage pump is located. A float switch wired to the pump acts an automatic switch, and turns the pump on and off as the level in the holding tank rises and falls. Since these pumps move sewage as well as water, they are rated for the size of solids they can move as well as how much water they can lift.

Main Features
The most important features to consider when choosing a sewage pump includes its 1) horsepower rating, 2) its maximum discharge flow - the flow the pump is designed to generate, 3) the maximum discharge pressure, the pressure the pump is meant to produce, and 4) the size of the discharge outlet connection.

Applications
Sewage pumps have a number of distinct applications: pumping small to large solids, to moving wastewater at large flow rates or high pressures, to simply pumping up water off the floor or the bottom of a tank. Depending on the design of the pump, some can be used for handling just water, for moving solids like sand or moving water in an irrigation system.

We offer the following three models from Liberty Pumps: LE40 Series | LE50 Series | Pro370 Series

Model

Description

LE40

Heavy-duty built and reliable, the LE40 sewage pump is the perfect choice for residential sewage applications. Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.

Main Features

4/10 hp
2" Solids Handling
Heavy cast iron construction
Oil filled, thermally protected motor
Permanently lubricated ball bearings.
Corrosion resistant, vortex style impeller made of high temperature engineered polymer.
All stainless steel fasteners and rotor shaft.
Quick disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to the motor. (25' length optional)

Models

Model	HP	Volts	Phase	Amps	Discharge	Automatic	Impeller
LE41M	4/10	115	1	12	2" FNPT	No	Vortex
LE41A	4/10	115	1	12	2" FNPT	Yes	Vortex

*Automatic models feature a mercury-free wide-angle float with series plug – allows for manual operation of pump separate from switch.

Weight: LE41M: 39 lbs
Height: LE41M: 14"
Major Width: LE41M: 10.75"
Maximum Fluid Temperature: 140° F.

LE50

Sporting a new tougher powder coat finish over heavy cast iron housings, the LE50 sewage pump is a commercial-grade workhorse for residential and light commercial sewage applications. Its efficient 1/2 hp motor with permanently lubricated bearings, stainless steel fasteners and quick-disconnect power cord design make it a sewage pump of choice among plumbing professionals. Other notable features include piggyback style switches on automatic models, 2" solids-handling ability and a shut-off head of 25 feet.

Main Features

1/2 hp
2" Solids Handling
112 GPM at 10' TDH
25' Maximum Head
Heavy cast iron construction
Oil filled, thermally protected motor
Permanently lubricated ball bearings.
2-vane, corrosion resistant HYTREL® impeller. (HYTREL® is a registered trademark of DuPont Polymers)
All stainless steel fasteners and rotor shaft.
Quick disconnect power cord allows replacement of cord in seconds without breaking seals to the motor.
Quick disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to the motor. (25' length optional)

Models

Model	HP	Volts	Phase	Amps	Discharge	Automatic	Impeller
LE51M	1/2	115	1	12	2" FNPT	No	2-VANE SEMI OPEN
LE51A	1/2	115	1	12	2" FNPT	Yes	2-VANE SEMI OPEN
LE52M	1/2	230	1	6.8	2" FNPT	No	2-VANE SEMI OPEN
LE52A	1/2	230	1	6.8	2" FNPT	Yes	2-VANE SEMI OPEN

Weight: LE51M: 42 lbs.
Height: 14"
Major Width: 11.5" (manual models)
Maximum Fluid Temperature: 140° F.

Pro370

The Pro370 sewage pump system is the most advanced residential sewage package available. Liberty's flagship product, the Pro370-Series sewage package, arrives from the factory pre-assembled with QuickTree Technology saving valuable labor time at the job site. Now available "alarm-ready" with pre-mounted alarm floats. Give the 370 a try and see why more contractors are demanding Liberty.

Main Features

Fully Assembled and shipped with a clear disposable construction cover that will protect the system during rough-in and masonry work.
Available with any of Liberty's 2" solids-handling sewage pumps
Unique QuickTree Technology system allows easy access and removal of switches without disturbing pump or plumbing.
Inspection/Access Cover
Integral rubber seals permanently attached to cover
Unique cord seal technology
Larger Basin- 40% more capacity than standard 18" X 30" basins. Results in decreasing switch cycles and improving pump life.
Integrally molded torque stops secure the pump in its proper position
Integrally molded anti-flotation collar
Integrally molded handles to ease transportation and installation
Includes Liberty's standard two-year limited warranty.

Weight: 60-86 lbs.
Height: 30"
Major Width: 21"

NORTH BRANCH
Tel: 416.492.6444
NORTH YORK ONTARIO CANADA

SOUTH BRANCH
Tel: 416.534.2338
TORONTO ONTARIO CANADA

3796 Victoria Park Ave.
North York, Ontario, Canada
M2H 3H7
Tel: 416.492.6444
Fax: 416.492.3303

967 College Street
Toronto, Ontario, Canada
M6H 1A6
Tel: 416.534.2338
Fax: 416.534.0415